Diamond Router Bits are designed to use with true portable routers such as Master, Stinger, Sector, Magma and Kawaii, with M8 or M10 bolt sizes. Both bolts are included in all the bits. Position 0 is segmented most aggressive and used for breaking the Edge， 1 though 3 are metal bond continuous rim design from 50 grit, to 100 grit and 200 grit. Position 4 through 7 are resin bond diamond polishing wheels for edge polishing
Use position 2 after position 1 will leave a much smoother edge ready for polishing pads, good reduce the time for polishing. You can start with 100 grit polishing pads instead of 50 grit pads, so that shape of the edge can be much better retained.
With the sets of diamond router bits, you can make clear polished edges without waving, commonly seen with hand polishing with diamond pads.
E20 for beveling of 2cm granite/marble or other types of stones.
E30 for 3cm or 1-1/4″ thick granite/marble or other types of stones.
E30 is for beveling of 3cm granite/marble or other types of stones.
Use Position 0 Segmented Router Bit For Rough Shaping And Grinding.
Use Position 1 And Position 2 Continuous Router Bits For Fine Grinding And Shaping.
Use Position 3 Continuous, 4, 5, 6 & 7 Resin Router Bits For Final Polishing.