Raizi 125mm Bush Hammer plate

Share on facebook
Share on twitter
Share on linkedin
  • Operating Speed: 700-800 RPM
  • Wet use strongly recommended and the more water the better
  • Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the tungsten steel
  • After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust
  • Roller tips can be re-dressed with diamond blades when they become inefficient. Please choose the different bush hammer
Thread

5/8''-11, M14

Size

5 inch 125mm, 6 inch 150mm

Clear

Bush hammer tool can be used with radial arm machines or powerful hand grinders for bush hammering of concrete floors and surfaces.

Adjustment of grit for bush-hammered surface

The Roughness of the bush hammered surface can be adjusted with our bush hammer through adjustment of spring elasticity on the bush hammer, or through the pressure of the manual grinding machine. Loosening spring elasticity or lessening pressure with increased roughness of hammering will result and tightening the springs or increasing machine pressure will reduce roughness to give the bush hammered surface a finer look.

Usage and maintenance of bush hammer

  • Operating Speed: 700-800 RPM
  • Wet use strongly recommended and the more water the better
  • Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the tungsten steel
  • After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust
  • Roller tips can be re-dressed with diamond blades when they become inefficient. Please choose the different bush hammer
Thread

5/8''-11, M14

Size

5 inch 125mm, 6 inch 150mm

Related products

Open chat